WATER
Toxic Metals & Mineral Analysis | ID:434-933-h0864

Getting the most from the results

The Bottom Line

The main purpose of this test is to reveal possible contamination within water of harmful toxic metals.

More than half of these metals are known to be toxic, dangerous, carcinogenic or have unknown effects on humans. Long red bars make it imperative to investigate possible contamination routes and investigate further.

Bar lengths are shown as a percentage of the maximum allowed guideline level of the particular metal. Blue bars indicate the result is under the max allowed level -i.e. under 100%

Guidelines

Contamination Guidelines set a maximum amount of heavy metal or mineral allowed in the water - expressed as mg/L

Water contamination Guidelines are available for Drinking Water, Irrigation Water and water used for Livestock. The guideline levels, however are different for the different intended water uses.

Clicking on the different guideline buttons shows the same result but visualised with the different guideline upper value

Dive Deeper

There are links within your results that take you to further information. This information is being updated regularly.

All links are in blue. Metal name links take you to the substance profile on Toxno.

Additional information includes your actual result expressed as mg of the metal per litre of water, the guideline upper value used to visualise the result, the date and lab job number and client sample details. LOD stands for "Limit of Detection"

Balance

Very toxic metals like Lead, Cadmium, Arsenic, Mercury and even Copper, don't want to be even near 100% of the allowed guideline.

It is paramount to find the source of the heavy metal contamination and if contamination exists, best to stop using the water in the interim.

Aluminium: 0.03542 mg/L (17.7%) | Drinking Water Guideline: 0.2 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.05

SAMPLE DETAILS: Reverse Osmosis Sample 16

Barium: 0.01407 mg/L (.3%) | Drinking Water Guideline: 5.6 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

SAMPLE DETAILS: Reverse Osmosis Sample 16

Boron: 0.00514 mg/L (.1%) | Drinking Water Guideline: 4 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.01

SAMPLE DETAILS: Reverse Osmosis Sample 16

Calcium: 9.672 mg/L (4.8%) | Drinking Water Guideline: 200 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.050

SAMPLE DETAILS: Reverse Osmosis Sample 16

Copper: 0.00479 mg/L (.2%) | Drinking Water Guideline: 2 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

SAMPLE DETAILS: Reverse Osmosis Sample 16

Iron: 0.01878 mg/L (6.3%) | Drinking Water Guideline: 0.3 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.05

SAMPLE DETAILS: Reverse Osmosis Sample 16

Lead: 0.00251 mg/L (25.1%) | Drinking Water Guideline: 0.01 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

SAMPLE DETAILS: Reverse Osmosis Sample 16

Lithium: 0.00462 mg/L (4.6%) | Drinking Water Guideline: 0.1 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

SAMPLE DETAILS: Reverse Osmosis Sample 16

Magnesium: 1590.042 mg/L (3180.1%) | Drinking Water Guideline: 50 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.050

SAMPLE DETAILS: Reverse Osmosis Sample 16

Manganese: 0.02246 mg/L (4.5%) | Drinking Water Guideline: 0.5 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

SAMPLE DETAILS: Reverse Osmosis Sample 16

Nickel: 0.00076 mg/L (.8%) | Drinking Water Guideline: 0.1 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

SAMPLE DETAILS: Reverse Osmosis Sample 16

Phosphorus: 0.08477 mg/L (?%) | Drinking Water Guideline: mg/L | Job #: h0864 | 6/06/2018 | LOD:0.050

Guidelines not available or under review
SAMPLE DETAILS: Reverse Osmosis Sample 16

Potassium: 1.254 mg/L (?%) | Drinking Water Guideline: mg/L | Job #: h0864 | 6/06/2018 | LOD:0.050

Guidelines not available or under review
SAMPLE DETAILS: Reverse Osmosis Sample 16

Sodium: 3.111 mg/L (1.7%) | Drinking Water Guideline: 180 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.050

SAMPLE DETAILS: Reverse Osmosis Sample 16

Strontium: 0.0193 mg/L (.1%) | Drinking Water Guideline: 17 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

SAMPLE DETAILS: Reverse Osmosis Sample 16

Sulphur: 9.639 mg/L (12%) | Drinking Water Guideline: 80 mg/L | Job #: h0864 | 6/06/2018 | LOD:3

SAMPLE DETAILS: Reverse Osmosis Sample 16

Vanadium: 0.00064 mg/L (.2%) | Drinking Water Guideline: 0.26 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

SAMPLE DETAILS: Reverse Osmosis Sample 16

Zinc: 0.00955 mg/L (.3%) | Drinking Water Guideline: 3 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.005

SAMPLE DETAILS: Reverse Osmosis Sample 16

Antimony | Drinking Water Guideline: 0.003 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Arsenic | Drinking Water Guideline: 0.01 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Beryllium | Drinking Water Guideline: 0.06 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Bismuth | Drinking Water Guideline: mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Guidelines not available or under review
SAMPLE DETAILS: Reverse Osmosis Sample 16

Cadmium | Drinking Water Guideline: 0.002 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Chromium | Drinking Water Guideline: 0.05 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Cobalt | Drinking Water Guideline: 0.011 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Mercury | Drinking Water Guideline: 0.001 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.0005

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Molybdenum | Drinking Water Guideline: 0.05 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Selenium | Drinking Water Guideline: 0.01 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.002

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Silver | Drinking Water Guideline: 0.1 mg/L | Job #: h0864 | 6/6/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Thallium | Drinking Water Guideline: 0.002 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Thorium | Drinking Water Guideline: 0.001 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Uranium | Drinking Water Guideline: 0.017 mg/L | Job #: h0864 | 6/06/2018 | LOD:0.001

Substance undetectable in sample or below the Lab's Limit of Detection (LOD)
SAMPLE DETAILS: Reverse Osmosis Sample 16

Getting the most from the results

The Bottom Line

The main purpose of this test is to reveal possible contamination within water of harmful toxic metals.

More than half of these metals are known to be toxic, dangerous, carcinogenic or have unknown effects on humans. Long red bars make it imperative to investigate possible contamination routes and investigate further.

Bar lengths are shown as a percentage of the maximum allowed guideline level of the particular metal. Blue bars indicate the result is under the max allowed level -i.e. under 100%

Guidelines

Contamination Guidelines set a maximum amount of heavy metal or mineral allowed in the water - expressed as mg/L

Water contamination Guidelines are available for Drinking Water, Irrigation Water and water used for Livestock. The guideline levels, however are different for the different intended water uses.

Clicking on the different guideline buttons shows the same result but visualised with the different guideline upper value

Dive Deeper

There are links within your results that take you to further information. This information is being updated regularly.

All links are in blue. Metal name links take you to the substance profile on Toxno.

Additional information includes your actual result expressed as mg of the metal per litre of water, the guideline upper value used to visualise the result, the date and lab job number and client sample details. LOD stands for "Limit of Detection"

Balance

Very toxic metals like Lead, Cadmium, Arsenic, Mercury and even Copper, don't want to be even near 100% of the allowed guideline.

It is paramount to find the source of the heavy metal contamination and if contamination exists, best to stop using the water in the interim.